Canon imageRUNNER 3300 Series Manual

Also see for imageRUNNER 2200 Series: Guide Copying guide

Contents

Canon imageRUNNER 3300 Series Manual Manual pdf 49 page image

Settings Menu 3-173Printer Settings Menu Functions and OperationPunch None, Top, Bottom, Left, RightThis setting enables you to specify the desired paper edge for holes to bepunched for binding (two or three holes).NOTE• This function can only be selected if a Saddle Finisher-G1is installed with a Puncher Unit-K1.• Acceptable paper sizes for this option are 11x17, Legal,Letter, Letter-R, A3 or A4.• Make sure to select compatible settings when usingStaple Sort and Punch simultaneously. If conflictingsettings are selected, such as the staple setting for theright side of the paper and the punch setting for the left,the printer will use neither Staple Sort nor Punch.• The machine automatically detects the size of the paperand punches two or three holes accordingly. (Legal andLetter-R papers are punched with two holes.)Booklet On, OffEnables you to prepare the printout for binding as a booklet. Unlike a book,pages in a booklet are bound on the same side. If [On] is selected, thepages are bound on the left side.NOTE• This function is available for selection if the image pagesize is Letter-R Statement, B4, A4 or A5. Letter-R pagesare printed on 11x17 paper, and Statement pages onLetter paper, A4 pages on A3 paper, A5 pages on A4Rpaper.• If the pages are not all the same size, this function will notwork.65438721On