Canon imageRUNNER 3300 Series Manual

Also see for imageRUNNER 2200 Series: Guide Copying guide

Contents

Canon imageRUNNER 3300 Series Manual Manual pdf 44 page image

Settings Menu3-123Printer Settings Menu Functions and OperationTimeout Timeout (5 - 15 - 300 s), OffWhen the machine is set to switch between printer modes, the machinedetects the control commands and starts printing in the appropriate mode.After all the data has been received and the end of the data is detected,the print mode stops. This processing of print data is called a job.If the data for a job does not end, the machine will not start the next jobeven if it receives other print commands. In cases like this, use the Timeoutsetting to force jobs to finish if no data is received during the set period oftime.When Timeout is On, if print data is still remaining in the machine becauseof being unable to send a form feed command, the paper can be fedautomatically. When the set time is finished, the job will automatically befinished.When Timeout is Off, jobs will not end automatically.IMPORTANT• When this function is set so that a job will timeout, themachine may end a print job before all the data has beenreceived if it takes a long time for the PC to send the data.If this occurs, adjust the length of the Timeout setting.• If [Off] is selected, you will not be able to make copiesuntil print jobs that use the staple sort, punch, and bookletsettings have been completed.• If this setting is set to more than 60 seconds, the machinewill cancel a job, due to a timeout, if it does not receive anend-of-job command causing the job not to print correctly.• This setting specifies the timeout setting for jobs receivedfrom the parallel port interface. If [Off] is selected themachine will not be able to receive print jobs from thenetwork until jobs received from the parallel port interfacehave been completed.NOTE• When a job is being processed, the Processing/Data lampon the control panel lights.Print AfterCompleting RIPOn, OffSets whether to use the Print after completing RIP function or not.If Print after completing RIP is selected, the first page is printed after all thepages in the job have been processed.Although it may take longer to print the first page, the remaining pages inthe job will be printed more quickly. This is useful when several people areusing the machine since the printing time for a print job is reduced, orwhen using the other functions, such as the Copy function.