Paper MenuSetting Item Description, InstructionsLoad Paper Select sheets or rolls and load the paper.Eject Paper Choose this item before removing loaded paper.Chg. Paper Type (*1 →P.675 ) Change the type of paper loaded. (See "Changing the Typeof Paper.") →P.583Chg. Paper Size Change the size of paper loaded. (See "Specifying the PaperLength.") →P.585 (See "Paper Sizes.") →P.569ManageRemainRoll Choose On to print a barcode at the end of a roll before youremove it. The printed barcode can be used in managing theamount of roll paper left. Choose Off if you prefer not to printthe barcode.(See "Keeping Track of the Amount of Roll Paper Left.")→P.591Paper Details (The type of pa-per is displayedhere.)(*1 →P.675 )Head Height Adjust the Printhead height. (See "Troubleshooting PaperAbrasion and Blurry Images (Head Height).") →P.626Skew CheckLv.If you print on Japanese paper (washi) or other handmade pa-per that has an irregular width, choose Loose for a higherskew detection threshold, or choose Off to disable skew de-tection. However, if paper is loaded askew when detection isOff, note that paper jams or Platen soiling may occur.Cutting Mode Specify whether or not to cut with the standard round-bladedcutter.Choose Automatic to have the roll cut automatically afterprinting. If you choose Manual, the paper will not be cut afterprinting. Instead, a line will be printed at the cut position.Choose Eject if you prefer not to have documents droppedimmediately after printing, as when waiting for ink to dry.Cut Speed Choose the cutting speed. If you use adhesive paper, choosingSlow helps prevent adhesive from sticking to the cutter andkeeps the cutter sharp.Trim EdgeFirstIf a roll is loaded, the end of the paper will be cut.CutDustRe-duct.If you choose On, a line will be printed at the cut positionwhen paper cutting is selected. This option reduces theamount of debris given off after cutting. It also helps preventadhesive from sticking to the cutter and keeps the cutter sharpif you use adhesive paper. (See "Reducing Dust from Cut-ting Rolls.") →P.601Vac-uumStrngthSpecify the level of suction that holds paper against the Plat-en. (See "Adjusting the Vacuum Strength (Vac-uumStrngth).") →P.636Control Panel > Printer Menu >Menu Settings iPF7508674
