Setting Item Description, InstructionsPaper Details (The type of pa-per is displayedhere.)(*1 →P.675 )Scan WaitTimeSpecify the time to wait for the ink to dry between each scan(after the printhead finishes moving in one direction), in con-sideration of how quickly the ink dries. Also specify the appli-cable area for the ink drying time. Select Entire area to applythe ink drying time after each scan until the document is fullyprinted. Select Leading edge to apply the ink drying time af-ter each scan only in the area 110–140 mm from the leadingedge. (The applicable length varies depending on the PrintQuality setting.) Note that printing will take longer if youspecify the Scan Wait Time setting. In particular, whenLeading edge is selected, colors may be uneven in the boun-dary between the areas with and without a drying time.Roll Drying-TimeSpecify the time to wait for the ink to dry for each sheet.NearEndRollMrgnSpecify the minimum margin at the leading edge of roll paperto ensure better printing quality at the leading edge.Note that if you choose 3mm, it may lower the printing quali-ty at the leading edge and affect feeding accuracy. The printedsurface may be scratched, and ink may adhere to the leadingedge. It may also cause the Platen to become soiled.NearEnd ShtMrgnSpecify a margin at the leading edge of sheets to ensure betterprinting quality at the leading edge.Note that if you choose 3mm, it may lower the printing quali-ty at the leading edge and affect feeding accuracy. The printedsurface may be scratched, and ink may adhere to the leadingedge.Bordless Mar-ginAdjust the margin during borderless printing.Choose Automatic to have the printer automatically detectthe paper width and configure the margin settings for border-less printing. If margins are mistakenly created when Auto-matic is selected, choose Fixed. In this case, the paper widthis not detected automatically, and the document is printedwithout borders, using the margin settings required by theprinter.Width Detec-tionSpecify this option to print inside boundaries or in other caseswhen specifying a particular starting position for printing.(See "Printing From a Desired Starting Point.") →P.606Paper width and skew are not detected if you select Off. If pa-per is loaded askew, note that paper jams or Platen soilingmay occur.Return De-faultsChoose OK to restore Paper Details to the default values.Paper Details Print the paper settings as specified in Paper Details.Keep Paper Type Select On when printing on a particular type of paper regular-ly. (See "Changing the Type of Paper.") →P.583*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types ofPaper.") →P.568 The types of paper indicated in the printer driver and related software (as well as on the Con-trol Panel) are updated when you install the printer driver from the User Software CD-ROM or if you updatepaper information by using the Media Configuration Tool. (See Media Configuration Tool →P.412 or MediaConfiguration Tool →P.543 .)Control Panel > Printer Menu >iPF750 Menu Settings8675
