Sheet printing is selected.Cause Corrective ActionYou have attempted to print a test print sheet orother printer status information on a sheet, butno sheet is loaded.Press ▲ or ▼ to select Load Cut Sheet, and then press the OKbutton. Load the sheet, and then print.(See "Loading and Printing on Sheets.") →P.9To print on rolls, follow these steps.1. Press ▲ or ▼ to select Stop Printing, and then press the OKbutton to stop printing.2. Load a roll and try printing again.(See "Loading and Printing on Rolls.") →P.6Regular printing is selected, but a roll is loaded.Cause Corrective ActionA print job for printingon sheets was sentwhen a roll is loaded.1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop print-ing.2. After removing the roll, load and print on a sheet of the type and size of paper you havespecified in the printer driver.(See "Removing the Roll from the Printer.") →P.585(See "Loading and Printing on Sheets.") →P.9Paper jam"Push the release lever back."Cause Corrective ActionA paper jam oc-curred in theprinter duringprinting.1. Push the Release Lever back and remove the jammed paper.(See "Clearing Jammed Roll Paper.") →P.773(See "Clearing a Jammed Sheet.") →P.7772. Load the paper.3. Pull the Release Lever forward.4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,press the OK button.Printing will resume, starting from the page on which the error occurred.(See "Loading Rolls in the Printer.") →P.579(See "Loading Sheets in the Printer.") →P.602Error Message > Messages regarding paper >iPF750 Sheet printing is selected.12817
