Repairing Your MachineWhen transporting the machine for repairing it, follow the procedure below to prepare.Important• When transporting the machine, make sure to avoid the followings.• You cannot take ink out of ink tanks.• Do not tilt the machine. Ink may leak.• Please handle with care and ensure the box remains flat and NOT turned upside down or on itsside, as the printer may be damaged and ink in the printer may leak.• Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficientprotective material to ensure safe transport.• Do not remove the cartridge. Ink may leak.• When transporting the machine, we recommend packing the machine in a plastic bag so that inkdoes not leak.• When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP"to keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITHCARE".1. Make sure machine is turned on.If the machine cannot be turned on, unplug it and go to step 4.2. If an error has occurred, press machine's Black or Color button.After the Alarm lamp is turned off, go to step 3.If the error is not cleared, press ON button to turn the machine off, and then unplug it. If the machinecannot be turned off, unplug it. Go to step 4.3. Set machine to transporting mode.Press and hold Stop button, and then release button when ON lamp flashes 7 times. The machine is setto transporting mode and turned off. Unplug the machine.4. Make sure that cartridge holder has moved to far right.If the cartridge holder is not to the right, move it to far right.567
