Network Key UnknownWPA/WPA2 or WEP Key Set for Access Point Unknown, Cannot ConnectSetting an Encryption KeyWPA/WPA2 or WEP Key Set for Access Point Unknown, CannotConnectFor details on setting up a wireless router, see the instruction manual provided with the wireless router orcontact its manufacturer. Make sure your computer can communicate with the wireless router.Set up the machine to match the wireless router settings using IJ Network Tool.Setting an Encryption KeyFor details on setting up a wireless router, see the instruction manual provided with the wireless router orcontact its manufacturer. Make sure your computer can communicate with the wireless router.Set up the machine to match the wireless router settings using IJ Network Tool.• Using WPA/WPA2The authentication method, passphrase, and dynamic encryption type must be the same for thewireless router, the machine, and your computer.Enter the passphrase configured on the wireless router (a sequence of between 8 and 63alphanumeric characters, or a 64-character hexadecimal number).Either TKIP (basic encryption) or AES (secure encryption) is selected automatically as the dynamicencryption method.◦ For Windows:For details, see Changing WPA/WPA2 Detailed Settings.◦ For Mac OS:For details, see Changing WPA/WPA2 Detailed Settings.Note• This machine supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2-Personal).• Using WEPThe key length, key format, key to use (one of 1 to 4), and authentication method must be the samefor the wireless router, the machine, and your computer.To communicate with a wireless router that uses automatically generated WEP keys, you must set themachine to use the key generated by the wireless router, entering it in hexadecimal format.473
