Printing Does Not StartCheck1 Make sure machine is securely plugged in and press ON button to turn it on.The ON lamp flashes while the machine is initializing. Wait until the ON lamp stops flashing and remains lit.Note• If you are printing large data such as photos or other graphics, printing may take longer to start. The ONlamp flashes while the computer is processing data and sending it to the machine. Wait until printing starts.Check2 Make sure machine is properly connected to computer.If you are using a USB cable, make sure it is securely connected to both the machine and the computer. Whenthe USB cable is securely plugged in, check the following:• If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to thecomputer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contactthe vendor of the relay device.• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.If you use the machine over a LAN, make sure the machine is correctly set up for network use.Check3 Is access point mode enabled?To print using a mode other than the access point mode, disable access point mode first.Using Machine with Access Point ModeCheck4 If printing from a computer, delete unnecessary print jobs.• For Windows:Deleting the Undesired Print Job• For Mac OS:Deleting the Undesired Print JobCheck5 Is your machine's printer driver is selected when printing?The machine will not print properly if you are using a printer driver for a different printer.• For Windows:Make sure "Canon XXX series Printer" (where "XXX" is your machine's name) is selected in the Print dialogbox.Note• To make the machine the one selected by default, select Set as Default Printer.• For Mac OS:Make sure your machine's name is selected in Printer in the Print dialog.492
