RestrictionsWhen connecting another device while a device (such as a smartphone) is already connected to the printer,connect it using the same connection method as the connected device.If you connect using a different connection method, the connection to the device in use will be disabled.Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.Connect via wireless router• You cannot establish a printer with wireless and wired connections at the same time.• Make sure your device and the wireless router are connected. For details on checking these settings,see the manual supplied with the wireless router or contact its manufacturer.As for a device already connected to the printer without using a wireless router, reconnect it via awireless router.• Configuration, router functions, setup procedures, and security settings of network devices varydepending on the system environment. For details, see the manual for your network device or contactits manufacturer.• Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g, or IEEE802.11b.• If your device is set to the "IEEE802.11n only" mode, neither WEP nor TKIP can be used as a securityprotocol. Change the security protocol for your device to something other than WEP and TKIP orchange the setting to something other than "IEEE802.11n only."The connection between your device and the wireless router will be temporarily disabled while thesetting is changed. Do not proceed to the next screen of this guide until setup is complete.• For office use, consult your network administrator.• Note that if you connect to a network with no security protection, your personal information could bedisclosed to a third party.Direct Connection (Access Point Mode)Important• If a device is connected to the Internet via a wireless router, and you then connect it to a printer inDirect Connection mode, the existing connection between the device and wireless router will bedisabled. In that case, the connection of the device may switch to a mobile data connectionautomatically depending on your device. When you connect to the Internet using a mobile dataconnection, charges may apply depending on your contract.• When you connect a device and the printer using Direct Connection, the connection informationwill be saved to Wi-Fi settings. The device may be connected to the printer automatically evenafter disconnecting it or connecting it to another wireless router.• You cannot connect to a wireless router and a printer in Direct Connection mode at the sametime. If you have a wireless router, it is recommended that you use the wireless router to connectto the printer.• To prevent automatic connection to the printer in Direct Connection mode, change the connectionmode after using the printer, or set not to connect automatically in the Wi-Fi settings of thedevice.For details on checking or changing wireless router settings, see the router manual or contact itsmanufacturer.• If you connect a device and the printer using Direct Connection, Internet connection may becomeunavailable depending on your environment. In that case, web services for the printer cannot be used.39
