Canon g3000 series Online Manual

Also see for g3000 series: Service manual Online manual Getting started Getting started Online manual

Contents

Canon g3000 series Online Manual Manual pdf 228 page image

Changing Settings in Wired LAN SheetNote• This function is not available depending on the printer you are using.• Enable the wired LAN setting of the printer to change the settings in the Wired LAN sheet.1. Start up IJ Network Tool.2. Select printer in Printers:.3. Click Configuration... button.4. Click Wired LAN button.5. Change or check settings.Click OK after changing configuration. A screen is displayed asking you for confirmation before thesettings are sent to the printer. If you click OK, the settings are sent to the printer and the TransmittedSettings screen is displayed.1. TCP/IP Setting:Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for yournetwork environment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCPserver functionality must be enabled on your router.Use following IP addressSelect this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.228