Changing Shooting Functions137Turning off the Red-Eye Reduction FunctionThe red-eye reduction lamp lights in order to reduce the red-eye effect thatoccurs when shooting in dark conditions with the flash. You can turn off thisfunction.● Select [Flash Settings], then press the mbutton.● Press the op buttons to select [Red-EyeLamp], then press the qr buttons toselect [Off].Changing the Image Display Right After ShootingYou can change the image display that appears after shooting.● Select [Review Info], then press the qrbuttons to select an option.Displaying the OverlayYou can display gridlines for vertical and horizontal guidance, or a 3:2 guideto confirm the printable area for L size or postcard size prints.● Select [Disp. Overlay], then press the qrbuttons to select an option.Detailed Displays detailed information (p. 45).FocusCheckThe area inside the AF frame ismagnified, allowing you to check thefocus. The procedure is the same asin “Checking the Focus” (p. 108).Grid Lines A grid overlays the display.3:2 GuideThe areas outside the 3:2 range aregrayed out. This area will not printwhen printing on paper with a 3:2aspect ratio.Both Both grid lines, and the 3:2 guidewill display.COPY
