76You can set the time delay (0 – 30 seconds) and the number of shots taken(1 – 10 shots).Select $.● After pressing the p button, press theop buttons to select $, thenimmediately press the n button.Select the settings.● Press the op buttons to select [Delay] or[Shots].● Press the qr buttons to select a value,then press the m button.● Follow Step 3 in “Ò Using the Self-Timer”(p. 63) to shoot.• Exposure and white balance settings are set with the first shot.• When you set the time delay for more than 2 seconds, the self-timer lamp andsound speed up 2 seconds before the shutter releases (when the flash will fire,the lamp lights).You can use a TV to display the camera screen content.• Connect the camera to a TV as described in “Viewing Images on a TV”(p. 110).• Shooting procedures are the same as when using the camera’s monitor.$ Customizing the Self-TimerWhat if the number of shots is set to two or more shots?• If the flash fires, the shooting interval may be longer.• If you set a high number of shots, the shooting interval may be longer.• If the memory card becomes full, shooting stops automatically.TV display is not available when using the HDMI Cable HTC-100 (soldseparately) to connect the camera to a high-definition TV.Shooting Using a TV MonitorCOPY
