53To save battery power, the camera shuts down automatically when it is notoperated for a certain time.Power Saving during ShootingThe monitor will turn off approximately 1 minute after the camera is lastoperated. After about 2 more minutes, the lens will retract and the power willturn off. When the monitor has turned off but the lens has not retracted yet,pressing the shutter button halfway (p. 23) turns on the monitor and shootingcan continue.Power Saving during PlaybackThe power will turn off approximately 5 minutes after the camera is lastoperated.You can change the length of time the images display directly after shooting.Set the mode switch to 4.Display the menu.● Press the n button.Select [Review].● Press the qr buttons to select the 4 tab.● Press the op buttons to select [Review],then press the qr buttons to select thedisplay time or setting.● If you select [Off], the image will notdisplay.● If you select [Hold], the image displaysuntil you press the shutter button halfway.• You can turn off the Power Saving Function (p. 132).• You can adjust the time before the monitor turns off (p. 132).Power Saving Function (Auto Power Down)Changing the Image Display TimeCOPY
