89You can change the look of an image when shooting. However, the shootingconditions may cause the image to become coarse, or the colors may notcome out as expected.T Color AccentYou can select to retain a single color and change the rest to black and whitein a composition.Select T.● Set the mode switch to 4, the press them button.● Press the op buttons to select G.● Press the qr buttons to select U(rightmost icon), then press the lbutton.● Press the qr buttons to select T, thenpress the m button.Press the l button.● The unchanged image and the ColorAccent image will both display.● The color for default settings is green.Specify the color.● Position the center frame so it is filled withthe color you want and press the q button.X The specified color will be recorded.Specify the range of colors.● Press the op buttons to change therange of colors to be retained.● Select a negative value to limit the rangeof colors. Select a positive value to extendthe range of colors to similar colors.● Pressing the l button accepts thesetting and restores the shooting screen.Changing the Color and ShootingRecorded colorCOPY
