66You can select the settings for various functions to suit your preferences. AEstands for Auto Exposure.Set the mode switch to 4 (p. 42).● G will appear.● If G does not appear, press the m buttonand select the shooting mode item. Pressthe qr buttons to select G and press them button.Adjust the settings according toyour purposes (pp. 66 – 76).Shoot.If a correct exposure cannot be obtained when pressing the shutter buttonhalfway, the shutter speed and aperture value display in red. Try the followingsettings to obtain the correct exposure.• Turn on the flash• Select a higher ISO speed (p. 72)You can make the flash fire every time you shoot. At maximum wide angle,the flash range is approximately 30 cm – 3.5 m (12 in. – 11 ft.), and atmaximum telephoto, it is 45 cm – 2.0 m (1.5 – 6.6 ft.).Select h.● After pressing the r button, press the qrbuttons to select h, then press the mbutton.X Once set, h will appear.G Shooting in Program AEWhat if the shutter speed and aperture value are displayedin red?h Turning the Flash OnCOPY
