Canon POWERSHOT IXUS100IS User Manual

Contents

Canon POWERSHOT IXUS100IS User Manual Manual pdf 138 page image

Changing Shooting Functions138Changing the IS-Mode Settings● Select [IS Mode], then press the qr buttonsto select an option.• In mode, you cannot set [3:2 Guide] or [Both].• Grid Lines will not be recorded on the image.• The gray areas displayed with [3:2 Guide] are the areas that will not beprinted. The actual image recorded will include the portion in the grayareas.ContinuousImage stabilization is always on.You can confirm the result directlyon the display, which makes iteasier to check the composition orfocus.Shoot Only Image stabilization is only active atthe moment of shooting.PanningImage stabilization only countersup and down motion. This option isrecommended for shooting objectsmoving horizontally.• If camera shake is too strong, attach the camera to a tripod. It isrecommended to set the IS Mode to [Off] when the camera is fixed to atripod.• When using [Panning], hold the camera horizontally. Image stabilizationdoes not work when the camera is held vertically.COPY