88You can set the shutter speed to a range between 1 and 15 seconds toshoot long exposures. However, you should attach the camera to a tripod toprevent the camera from moving and blurring the image.Select ≈.● Set the mode switch to 4, the press them button.● Press the op buttons to select G.● Press the qr buttons to select U(rightmost icon), then press the lbutton.● Press the qr buttons to select ≈, thenpress the m button.Select the shutter speed.● Press the o button.● Press the qr buttons, select shutterspeed and press the m button.Confirm the exposure.● When you press the shutter buttonhalfway, the exposure for the selectedshutter speed will appear.≈ Shooting Long Exposures• The brightness of the image may differ from the brightness of the screenin Step 3 when the shutter button was pressed halfway.• When shutter speeds of 1.3 seconds or slower are used, images areprocessed to eliminate noise after being taken. A certain amount ofprocessing time may be needed before you can take the next shot.• It is recommended to set the [IS Mode] to [Off] when shooting with atripod (p. 138).If the flash fires, the image may be overexposed. If this happens, set theflash to ! and shoot.COPY
