Chapter 10 93Changing the Machine Settings(2) Use [ ] or [ ] to select the menu, then press [OK].Example: select .5 Change the settings.(1) Use [ ] or [ ] to select the setting item, then press [OK].Example: select .The Print Settings Quiet modeUse this function if you want to reduce the operation noise, such as when printing at night. Prevent paper abrasionUse this setting only if the print surface becomes smudged. Extended copy amountSelects the amount of image that extends off the paper when printing in Borderless (full).Important z The printing speed may be reduced compared to when this setting isset to .z This function may not be so effective depending on the print qualitysetting.z Furthermore, certain noise, such as when the machine is preparing forprinting, is not reduced.Important Be sure to revert this setting to after printing since it may result inlower print quality.Note z This setting can be applied only when Copy or Photo/film modeselected.z If you set for this function, the area of the image extending offthe paper becomes larger.(2)(1)
