26 Chapter 1Before Printingz Loading EnvelopesUse either European DL or US Comm. Env. #10 size envelopes.The address is rotated automatically to match the direction of the envelope when printing.1 Load the envelope against the Cover Guide on the right side of the Paper Supportwith the print side facing UP, and the rear flaps DOWN on the left.2 Pinch the Paper Guide and slide it against the left side of the envelope.3 Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.4 Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in[Page Size].For information on the printer driver settings, refer to the Printer Driver Guide.Important z Envelopes can be used only when printing from a computer.z Do not use envelopes with embossed or treated surfaces, a doubleflap, pressure seals or sticker flaps.z Select either [DL Env.] or [Comm. Env. #10] according to the envelopesize you are using.z The printed image will be upside down depending on the application. Ifthis occurs, open the printer properties dialog box then select the[Rotate 180 degrees] check box on the [Page Setup] tab.For information on the printer driver settings, refer to the Printer DriverGuide.Important Ensure that the Cover Guide stands when you load paper in the AutoSheet Feeder.Note A maximum of 10 envelopes can be loaded at once.Note z Fold the envelope flap shut (A).z Printing direction (B).213(B)(A)
