|
Chapter 2 41Copying(2) Use [ ] or [ ] to select , then press [OK].The Special copy screen is displayed.z Copying onto Both Sides of the Paper (Two-sided copy)You can copy two document pages onto the sides of a single sheet of paper.Long-side stapling and Short-side staplingProcedure:(1) Display the Special copy screen.See “Special Copy” on page 40.(2) Use [ ] or [ ] to select , then press [OK].(3) Use [ ] or [ ] to select the orientation of the document, then press [OK].(4) Use [ ] or [ ] to select the binding margin, then press [OK].(5) Follow the on-screen instructions to load the document to be printed on the front face onthe Platen Glass, then press [OK].(6) Specify the necessary items.See “To Change Print Settings” on page 34.(7) Press [Color] for color copying, or [Black] for black & white copying.(8) Load the document to be printed on the back face on the Platen Glass. If you have onlyone document to scan, press [OK].(9) Press [Color] or [Black]. Be sure to press the same button as you pressed in step (7).Important If you do not press the same button in step (7) and step (9), the machinedoes not start copying.Note z This function cannot be used in conjunction with under or other copy functions.z If you perform black & white copying for , printintensity may be different from when performing black & white copyingfor single-sided copy.z This function can only be used when the page size is set to <8.5" x 11"(215.9 x 279.4)> or .z The media type is fixed to . You cannot change thissetting.(2)
|
