Chapter 351Printing from a Memory Card4Start printing.(1)Confirm the settings.To change any of the settings, press [Settings].See “Changing the Print Settings” on page 34.(2)Press [Color].The specified number of copies of each photo will be printed.Other Useful FunctionsSearching for Photos with the Shooting Date (Search)When there are a lot of photos saved on the memory card, you can choose to display and printonly photos shot on the specified date or within the specified range of dates.1Set the search method.(1)Press [Search].The Search method screen is displayed.(2)Use [] or [] to select the search method.If you want to specify only one date for search, select .If you want to specify the date range for search, select (3)Press [OK].The date input screen is displayed.2Specify the date range.zIf you selected :(1)Use [] or [] to specify the date to search for.(2)Go to main step 3.zIf you selected (1)Use [] or [] to specify the date of the oldest photos you want to print, then press[OK].(2)Use [] or [] to specify the date of the most recent photos you want to print.(3)Go to main step 3.NotezTo cancel printing, press [Stop/Reset].zThe printing is not started if you press [Black].NotezBy pressing [Search] to specify a date or date range, you can displayand print the photos shot on the specified date or within the specifieddate range in or , print>, , or ().zIf the number of prints to make is already specified for some photosbefore searching with the shooting date, or if some photos are alreadypasted on a layout, those photos will still be selected for printing evenif they were not shot on the specified date or within the specified daterange.zWhen using , or info>(), only the photos shot on the specified date or within thespecified date range can be printed.NoteIt may take a while for the date input screen to be displayed dependingon the number of photos saved on the memory card.
