|
Chapter 2 39Copying Reducing or Enlarging a CopyYou can reduce or enlarge copies.1 Prepare for copying.See “Prepare for copying.” on page 38.2 Select the reduction/enlargement method.The example below assumes that you will select .(1) Press [Settings].(2) Use [ ] or [ ] to select Tab 1.(3) Use [ ] or [ ] to select , and use [ ] or [ ] to select 400%)>.Specify the custom copy ratio for reducing or enlarging copies.Besides , you can also choose from the following reduction/enlargement methods.(4) Press [ ] to move the cursor down, and use [ ] or [ ] to select the setting value.Holding down [ ] or [ ] steps through the values faster.3 Finalize your selection.(1) Press [Settings].Return to the Copy standby screen.4 Start copying.See “Start copying.” on page 38.Same magnification: Copies in the same size as an original.Preset ratio: Preset ratios are convenient when changing between standard pagesizes, for example, when reducing A4 to A5, or enlarging B5 to A4.Fit-to-page: You can automatically reduce or enlarge the document to fit the size ofthe paper which are loaded in the Auto Sheet Feeder or Cassette.Note When you choose , the document size may not be detectedcorrectly depending on the document. In that case, choose magnification>, or .(3)
|
