Chapter 8 89Scanning ImagesFor detailed operations of the MP Navigator, refer to the Scan Guide. Scanning Using the Operation Panel of the MachineYou can scan documents to your computer by using the Operation Panel on the machine.z If you are using Windows XPThe program selection screen is displayed the first time you press [Color] or [Black] on themachine. Specify [MP Navigator Ver2.0] as the application software to use, check [Alwaysuse this program for this action], then click [OK]. From the next time, MP Navigator isautomatically started.z When using Mac OS XFor the machine to start scanning when [Color] or [Black] is pressed, you need to set MPNavigator as the starting application software in Image Capture under [Applications] of MacOS X.If you are using Mac OS X v.10.3.xSelect [Applications] from the [Go] menu, then double click [Image Capture]. Click[Options] at lower left of the scanner window, select [MP Navigator 2.0] from [Application tolaunch when scanner button is pressed], then click [OK].If you are using Mac OS X v.10.2.4 or laterSelect [Applications] from the [Go] menu, then double click [Image Capture]. Select[Preferences] from the [Image Capture] menu. Select [Others] from [When a scannerbutton is pressed, open], select [MP Navigator 2] from [Applications], then click [Open].1 Press [ON/OFF] to turn on the machine.See “Turning on the Machine” on page 17.2 Load the document on the Platen Glass.For details on how to load documents, see “Loading Documents” on page 18.For details on setting film originals, see “Scanning a Film” on page 62.Important Do not insert or remove USB cables when scanning images with themachine connected to a computer, or when the computer is at sleep orstandby mode.Important z If you are using Mac OS X v.10.4, the settings below are notnecessary.z Make sure that the MP Navigator is installed and that the Macintosh isconnected to the machine before starting up Image Capture.Important If you select [Preferences] from the [Image Capture] menu, click[Scanner], and mark [Use TWAIN software whenever possible], [Options]is not displayed. In this case, click [Use TWAIN software wheneverpossible] to uncheck the option, exit the Image Capture, then start itagain.
