Canon PIXMA MP950 User Manual

Also see for PIXMA MP950: Supplementary guide Start here Service manual

Contents

Canon PIXMA MP950 User Manual Manual pdf 8 page image

6Handling Do not attempt to disassemble or modify the machine. There are no user serviceable partsinside the machine.The machine contains high-voltage components. Never attempt any maintenanceprocedure not described in this guide. Incorrect maintenance procedures may damage themachine, or cause a fire or electrical shock.Do not drop paper clips, staples, or other metal objects inside the machine. Also do notspill water, liquid, or flammable substances inside the machine. If these items come intocontact with high-voltage parts inside the machine, it may result in fire or electrical shock.If these items are dropped or spilled in the machine, turn OFF the power and unplug thepower cord immediately with dry hands. Then contact the Canon Customer Care Center.Do not use flammable sprays near the machine.This could cause a fire or electrical shock if the spray comes into contact with electricalcomponents inside the machine.There are high-voltage components inside the machine. If you are looking inside themachine to clear paper jams etc., do not allow metal objects such as jewelry to come intocontact with the inside of the machine. Contact may result in burns or electrical shock.Others This product emits low level magnetic flux. If you use a cardiac pacemaker and feelabnormalities, please move away from this product and consult your doctor.When setting the machine near electric products with fluorescent lighting, separate themachine at least 5.9 inches (15 cm) from electric products equipped with fluorescentlighting. If you place it near to them, the machine may malfunction as a result of the noiseemitted by the fluorescent lighting.When turning OFF the power, be sure to press [ON/OFF] and confirm that the Alarm Lamphas shut off. If you pull the power plug out of the wall outlet while the Alarm Lamp is lit orflashing, the Print Head is not protected, and you may not be able to print later.Caution You may cause injury or damage the machine if you ignore any of these safetyprecautions.Location Do not block or cover the ventilation port or any openings on the machine with objects, asit may cause the inside of machine to overheat and cause a fire.Place the machine on a flat, stable, vibration-free surface that is strong enough to supportits weight. If the machine topples over, it may result in injury. (For the weight of themachine, see “Appendix” on page 146.)Do not use or store the machine outdoors.Do not install the machine near devices that contain magnets or generate magnetic fields,such as speakers.To ensure proper ventilation, make sure the machine is approximately 4 inches (10 cm)away from walls and other equipment.Do not install the machine in a location that is very humid or dusty, in direct sunlight,outdoors, or close to a heating source.Installing in such a location may result in fire or electrical shock.To avoid the risk of fire or electrical shocks, install the machine in a location with anambient temperature range of 41°F to 95°F (5°C to 35°C) and humidity of 10% to 90%(condensation free).Do not place the machine on a thick rug or carpet.If fibers or dust come inside the machine, it could cause a fire.