Chapter 5 77Printing Photographs Directly from a Compliant DeviceYou may not be able to purchase some Canon branded paper depending on your country. Printing Directly from a Digital Camera or a Digital Video CamcorderThis section describes how to print after connecting a camera to the machine.1 Display the image you want to print in replay mode.z If the camera will not change to replay mode, refer to the manual supplied with your digitalcamera for instructions how to.z When the digital camera is correctly connected, the icon will display on the LCD of thedigital camera.2 Press [SET] on the digital camera.The print setting menu is displayed on the LCD of the digital camera.3 Select [Style] and specify the page size, bordered or borderless printing, and dateprinting ON or OFF.4 Specify the number of copies, select [Print], and then press [SET] on the digitalcamera.Note z For the digital camera operation method and troubleshooting, refer toyour digital camera manual.z For print error messages, see “Cannot Print Properly from the DigitalCamera” on page 130.Note z By operating the digital camera, you can make the following prints:– You can make a standard print from the image displayed in the singledisplay mode or in the index display mode.– You can print specified numbers of images, or make an index printby editing the DPOF.* Images other than Exif may not be index printed.– For the images taken with an ExifPrint compatible digital camera, theExifPrint function can be used.– If date printing is set from the digital camera, the date when thephotograph was taken is to be printed (excluding the index print).– Images will be scaled automatically according to the image size seton the digital camera and the size of the media set on the machine.z The digital camera does not support the following functions:– Print quality setting– Machine maintenancez To disconnect the USB cable connecting the digital camera to themachine, follow the procedure below:1. Disconnect the USB cable from the machine.2. Turn OFF the digital camera.3. Disconnect the USB cable from the digital camera.When disconnecting the USB cable, be sure to hold the connectorby its sides.
