|
Chapter 6 81Printing Photographs from a Wireless Communication Device Changing the Bluetooth Settings - Bluetooth settingsYou can change the device name of the machine, passkey, and so on in Bluetooth settings.1 Press [ON/OFF] to turn on the machine.See “Turning the Machine ON and OFF” on page 17.2 Connect the Bluetooth Unit BU-20 to the Direct Print Port.3 Display the Bluetooth settings screen.(1) Press [Menu].(2) Use [ ] or [ ] to select and then press [OK].(3) Use [ ] or [ ] to select and then press [OK].(4) Use [ ] or [ ] to select and then press [OK].4 Confirm or change the settings.(1) Use [ ] or [ ] to select the item to set.(2) Use [ ], [ ], [ ], [ ] to select the item.(3) Press [OK] after finishing all settings you need. Setting ItemsNote z Communication is possible up to about 32.8 ft/10m depending on theconditions below. The printing speed may change depending on the followingconditions:– Presence of obstacles between the communication equipment and radiowave conditions.– Presence of magnetic fields, static electricity or electromagneticinterference.– Receiver sensitivity and antenna performance of the communicationequipment.z For the transmittable data, see “About transmittable data” on page 79.: Select the device name of this machine displayed on the screen of theBluetooth devices.When you set the machine name on the Bluetooth device is"Canon MP800-2."The initial value is set to .: Selecting will disable search this machine from Bluetooth devices.: Selecting will enable a passkey to be set or changed. Setting apasskey will prevent incorrect access from other Bluetooth devices.: You can change the passkey. The passkey refers to an identificationnumber to be determined. It is used to prevent incorrect access fromother Bluetooth devices.The initial value is set to <0000>.After you change the passkey, you are required to enter the new passkeyagain. Enter the new passkey to Bluetooth device.
|
