102 Chapter 11Routine Maintenance Performing Maintenance1 Press [ON/OFF] to turn on the machine.See “Turning the Machine ON and OFF” on page 17.2 Press [Menu].3 Display the Maintenance screen.(1) Use [ ] or [ ] to select , then press [OK].The Maintenance/settings screen is displayed.(2) Use [ ] or [ ] to select , then press [OK].The Maintenance screen is displayed.(3) Use [ ] or [ ] to select the setting item, then press [OK].The setting screen for the selected item is displayed. Printing the Nozzle Check PatternPrint the nozzle check pattern to determine whether the ink ejects properly from the Print Headnozzles and to verify Print Head alignment. Use this function when printed results are blurred orthe color is incorrect.1 Press [ON/OFF] to turn on the machine, then load a sheet of A4 or Letter-sizedplain paper in the Auto Sheet Feeder or the Cassette.See “Turning on the Machine” on page 17 and “Loading Paper” on page 19.2 Use [Feed Switch] to select the paper source where you have loaded paper.Note Ensure that the Inner Cover is closed.(1)(2)(3)
