Chapter 11 105Routine Maintenance(3) Use [ ] or [ ] to select and then press [OK].The machine starts the Print Head cleaning.3 Check the status of the Print Head.After Print Head cleaning finishes, the nozzle check confirmation screen is displayed. Printthe nozzle check pattern to verify that the Print Head nozzles are clean. See “Printing theNozzle Check Pattern” on page 102. Print Head Deep CleaningIf print quality does not improve by standard Print Head cleaning, try Print Head deep cleaning,which is a more powerful process. Print Head deep cleaning consumes more ink than standardprint head cleaning, so perform this procedure only when necessary.1 Press [ON/OFF] to turn on the machine.See “Turning on the Machine” on page 17.2 Perform deep cleaning of the Print Head.(1) Display the Maintenance screen.See “Performing Maintenance” on page 102.(2) Use [ ] or [ ] to select and then press [OK].The confirmation screen is displayed.Important Do not perform any other operations until the Print Head cleaningfinishes. This takes about 50 seconds.Note If you perform cleaning and nozzle check twice and the result does notimprove, then perform Deep cleaning.See “Print Head Deep Cleaning” on page 105.Note Ensure that the Inner Cover is closed.(3)(2)
