Canon PIXMA MP800 User Manual

Also see for PIXMA MP800: Supplementary guide Brochure & specs Start here Service manual User guide

Contents

Canon PIXMA MP800 User Manual Manual pdf 74 page image

72 Chapter 5Printing Photographs Directly from a Compliant Device(3) Turn on and set up the device for direct printing.Either of the following icons will display on the LCD display of the device when themachine is correctly connected.A PictBridge compliant device.A Canon Bubble Jet Direct compatible digital camera.Printing Photographs Directly from a PictBridgeCompliant DeviceWhen operating the device, be sure to follow the instructions given in the instruction manual suppliedwith the PictBridge compliant device. Let’s take a look at the page size, media type, layout, imageoptimization modes, and date/file no. printing that can be set on a PictBridge compliant deviceconnected to the machine. Checking or Changing PictBridge Print Settings from Your CameraTo change the page size or media type operate the device to select the PictBridge print setupmode and confirm or change the settings.The settings below can be changed by pressing [Settings] in Memory card mode of this machinewhen a PictBridge compliant device is connected. However, changes can be made on theSettings screen (Memory Card) only when the corresponding items below are in the “Default”setting items (selections based on the machine setting) using the controls of the device.About the Settings Explained belowThe settings explained on the following pages cannot be made on some PictBridge compliantdevices. If any setting cannot be made, the machine setting is used.* Names of settings that are displayed on Canon PictBridge compliant device are used in thedescription given below. Different names may be displayed on the PictBridge compliant devicedepending on the brand or model.About Image Data Format for PrintingThis machine accepts images* taken with a camera compatible with the Design rule for CameraFile System and PNG files.* Exif2.21 compliantNote If neither of these icons appear, see “Cannot Print Properly from theDigital Camera” on page 128.PictBridge compliant devicesetting itemsMachine setting on the Print Setting screenPage size : Default You can change the machine settings of (1), (2), and (4)on tab 1 in Memory card mode.For the setting items, see “Memory card and Photo/filmmodes” on page 35.Media type : DefaultLayout : DefaultImage optimize : Default You can change the machine settings on tab 2 in Memorycard mode.For the setting items, see “Memory card and Photo/filmmodes” on page 35.