16 Chapter 1Before Printing(6) LCD (Liquid Crystal Display)Displays messages, menu selections, and the operation status.(7) [Menu]Used to display menus.(8) [Settings]Use to configure the page size, media type, and image correction settings.(9) [Stop/Reset]Cancels operations. If this button is pressed during printing, the machine aborts printing.(10) Auto Sheet Feeder LampLit when the Auto Sheet Feeder is selected.(11) Cassette LampLit when the Cassette is selected.(12) [Feed Switch]Selects the paper source. Press this toggle switch to change the paper source betweenthe Auto Sheet Feeder and Cassette.(13) Alarm LampLights or flashes orange, when an error occurs, or when paper or ink has run out.(14) [Search]Looks up target photos in the memory card using the shooting date as the search key.See “Searching for Photos with the Shooting Date (Search)” on page 50.(15) [Photo Index Sheet]Switches to Photo Index Sheet mode. See “Printing by Using the Photo Index Sheet” onpage 56.(16) [Back]Allows you to return to the previous screen.(17) [OK]Finalizes your selection for the menu or setting item.Restores the machine to normal operation after a printing error was resolved, or if paperjams are cleared.(18) [ ] [ ] [ ] [ ]Scroll through menu selections, and increase or decrease the number of copies. You canuse these buttons when < >, < >, < >, and < > are displayed on the LCD.(19) [Trimming]Use to crop the photo that is displayed. See “Printing a Specified Area (Trimming)” onpage 51.(20) [Black]Starts black & white copying, or photo scanning.(21) [Color]Starts color copying, photo printing, or scanning.
