Chapter 12 141Troubleshooting Error No.: 1700 is Displayed Error No.: 1851 is Displayed Error No.: 1856 is DisplayedThe name of the machine being usedis not selected in the [Printer] pull-down menu of the [Print] dialog box.Select [MP800] from the [Printer] pop-up menu in the [Print] dialog box ofthe printer driver.If [MP800] is not displayed in the printer list, follow the procedure below toconfirm the settings.1. Select [Edit Printer List...] from the [Printer] pop-up menu in the [Print]dialog box. The printer list is displayed.2. Check that [MP800] is displayed in the printer list.If [MP800] is not displayed, install the MP Drivers again referring to theEasy Setup Instructions for the operation.Cause ActionThe waste ink absorber is almostfull.Ink used for cleaning is absorbed in a waste ink absorber placed in themachine.Press [OK] to cancel the error so that you can continue printing. Once thewaste ink absorber becomes completely full, printing cannot be done untilthe waste ink absorber is replaced.Canon recommends to contact the Canon Customer Care Center as soonas possible.Cause ActionInner Cover is open when startingregular printing.Close Inner Cover, then press [OK] on the machine.Cause ActionDuring regular printing, Inner Coveris opened.Close Inner Cover, press [OK] on the machine, then try printing again.One page of the print data being sent at the time of the error will beerased, so print that page again.Cause Action
