Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Client PCP044Settings on Client PCAfter setting up the print server system, set up the client system.The procedure for setting up the client systems is as follows:If you are using Windows 7 or Windows Vista1. Install the printer driver on the client systemsFor installation instructions, see " Installing the MP Drivers ."NoteDuring the installation, a screen prompting you to turn the printer on appears. Click ManualSelection and then select an appropriate port to complete your installation.2. Start the wizardIf you are using Windows 7, select the Start menu -> Devices and Printers -> Add a printer.If you are using Windows Vista, select the Start menu -> Network -> Add Printer.The Add Printer window appears.3. Add a printerSelect Add a network, wireless or Bluetooth printer, and click the icon for the printer that you haveconfigured on the print server system to be shared, and then click Next.NoteIf the icon for the printer is not displayed, check that the printer is actually connected to the printserver.It may take some time for the icon for the printer to appear.4. Complete the setupTake the appropriate action as described on the screen and then click Finish.If you are using Windows 7, the icon for the shared printer will be created in the Devices andPrinters window.If you are using Windows Vista, the icon for the shared printer will be created in the Printerswindow.The setup on the client systems is complete. You can now share the printer in the network.If you are using Windows XP1. Install the printer driver on the client systemsFor installation instructions, see " Installing the MP Drivers ."NoteDuring the installation, a screen prompting you to turn the printer on appears. Click ManualSelection and then select an appropriate port to complete your installation.Page 699 of 707 pagesSettings on Client PC
