Advanced Guide > Troubleshooting > For Windows UsersU333For Windows UsersPrinter Status Monitor Is Not DisplayedCheck: Is the printer status monitor enabled?Make sure that Enable Status Monitor is selected on the Option menu of the printer statusmonitor.1. Open the printer driver setup window.Opening the Printer Driver Setup Window2. On the Maintenance sheet, click View Printer Status.3. Select Enable Status Monitor on the Option menu if it is not selected.If you are using Windows 7 or Windows Vista:Launching MP Navigator EX Whenever Pressing the SCAN Button on the MachineCheck: Specify the response from pressing the SCAN button on the machine.Follow the procedure below to specify the response on your computer.If you are using Windows 7:1. Log on as a user account with administrator privilege.2. Select Devices and Printers from the Start menu.3. Right-click the Canon XXX Printer icon (where "XXX" is your machine's name),then select Scan properties.If the User Account Control screen appears, click Yes.4. Click the Events tab on the WIA Canon XXX ser Properties (where "XXX" is yourmachine's name) screen.5. Select Start this program for Actions, then select MP Navigator EX Ver4.0 fromthe pull-down menu.Choose an event from the Select an event pull-down menu, then select MP NavigatorEX Ver4.0 to launch for each event. If MP Navigator EX Ver4.0 is already selected foreach event, click Cancel.6. Click OK.If you are using Windows Vista:1. Log on as a user account with administrator privilege.Page 645 of 707 pagesFor Windows Users
