The printer is not detected. Check the connection. may be displayed depending on thecomputer you use. In this case, follow the procedure below to reinstall the MP Drivers.1. Click Cancel.2. Click Start Over on the Installation Failure screen.3. Click Back on the screen that appears next.4. Click Exit on the PIXMA XXX screen (where "XXX" is your machine's name), thenremove the CD-ROM.5. Turn the machine off.6. Restart the computer.7. Make sure that you have no application software running.8. Insert the CD-ROM again, then perform Easy Install to install the MP Drivers.In other cases:Follow the procedure described in your setup manual to reinstall the MP Drivers.If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, andthen reinstall the MP Drivers.Deleting the Unnecessary MP DriversIf you reinstall the MP Drivers, perform Custom Install on the Setup CD-ROM, then select MP Drivers.NoteIf the installer was forced to be terminated due to a Windows error, the system may be in anunstable condition and you may not be able to install the drivers. Restart your computer beforereinstalling.Page topPage 611 of 707 pagesCannot Install the MP Drivers
