Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens >Scanner TabS812Scanner TabOn the Scanner tab, you can specify the following settings.Quiet ModeSelect this checkbox to reduce scanner sound by slowing down the scanner head when previewing orscanning documents.NoteScanning takes longer than usual when you enable this function.Select Folder Where Temporary Files are SavedDisplays the folder in which to save images temporarily. To change the folder, click Browse... to specifyanother one.Sound SettingsYou can set the machine to play music during/at the end of a scan.Select the Play Music During Scanning or Play Sound When Scanning is Completed checkbox, thenclick Browse... and specify a sound file.You can specify the following files.- MIDI file (*.mid, *.rmi, *.midi)- Audio file (*.wav, *.aif, *.aiff)- MP3 file (*.mp3)Calibration SettingsWhen you set Execute at Every Scan to ON, the scanner will be calibrated every time before previewingand scanning, to reproduce correct color tones in scanned images.NoteEven when Execute at Every Scan is set to OFF, the scanner may be calibrated automatically insome cases (such as immediately after you turn the machine on).Calibration may take time depending on your computer.Page 553 of 707 pagesScanner Tab
