Advanced Guide TroubleshootingContents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print HeadDeeplyC097Cleaning the Print Head DeeplyIf print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply.Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, soclean the Print Head deeply only when necessary.1. Make sure that the power is turned on.2. Clean the Print Head deeply.(1) Press the (Maintenance) button repeatedly until y appears.(2) Press the Black or Color button.The machine starts cleaning the Print Head deeply.Do not perform any other operations until the machine completes the deep cleaning of the Print Head. Thistakes about 2 minutes.3. Check the print head condition.When the deep cleaning is completed, the LED returns to the copy standby mode.To check the print head condition, print the nozzle check pattern.See Printing the Nozzle Check Pattern.If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours.If the problem is still not resolved, replace the FINE Cartridge with a new one.See Replacing a FINE Cartridge.If the problem is still not resolved after replacing the FINE Cartridge, contact the service center.Page topPage 57 of 707 pagesCleaning the Print Head Deeply
