Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings UsingScanGear (Scanner Driver) > Scanning in Advanced ModeS205Scanning in Advanced ModeUse the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone,etc. when scanning.This section explains how to scan a single document.See "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multipledocuments at one time.ImportantThe following types of documents may not be cropped correctly. In that case, click(Thumbnail) on the Toolbar to switch to whole image view and scan.- Photos that have a whitish border- Documents printed on white paper, hand-written text, business cards, etc.- Thin documents- Thick documentsThe following types of documents cannot be cropped correctly.- Documents smaller than 1.18 inches (3 cm) square- Photos that have been cut to various shapes1. Place the document on the Platen, then start ScanGear (scanner driver).Placing DocumentsStarting ScanGear (Scanner Driver)2. Click the Advanced Mode tab.The Advanced Mode tab appears.NoteSettings are not retained when you switch modes.Page 499 of 707 pagesScanning in Advanced Mode
