Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Reducing or Enlarging a CopyU033Reducing or Enlarging a CopyThe Fit-to-Page copy function enables you to copy the original automatically enlarged or reduced to fit theselected page size.NoteYou can switch the size of paper loaded in the Rear Tray between A4 and 8.5" x 11" (Letter)regardless of the size indicated on the Operation Panel.Switching the Page Size between A4 and Letter1. Make sure that the machine is turned on.2. Load the plain paper on the Rear Tray.3. Load the original on the Platen Glass.4. Press the Paper button repeatedly to select the page size and media type accordingto the paper loaded in step 2.NoteWhen the plain paper is selected for the media type, the original is copied with borders. Whenthe photo paper is selected for the media type, the original is copied without borders and fillsthe entire page.5. Press the Fit to Page button.The Fit to Page lamp lights up.NoteTo cancel Fit to Page copying, press the Fit to Page button again. When pressing the Fit toPage button, the Fit to Page lamp is off and the Fit to Page copying is canceled.You can use the Fit to Page button only when you are using the copy function.6. Specify the number of copies (max. 20 copies).To make 1 to 9 copies or 20 copiesDisplay the desired number of copies on the LED. Each time you press the + button, the number onthe LED increases by one.When the LED displays as follows, the number of copies is set to "20". Press the + button again toreturn to "1".To make 10 to 19 copies1. Press the + button repeatedly until the LED displays as follows.2. Load only the desired number of sheets to copy.NotePressing the Stop/Reset button returns the number of copies to 1.Page 323 of 707 pagesReducing or Enlarging a Copy
