1. Roll up the paper in the opposite direction to the paper curl as shown below.2. Check that the paper is now flat.We recommend printing curl-corrected paper one sheet at a time.NoteDepending on the media type, the paper may be smudged or may not be fed properly even if itis not curled inward. In such cases, follow the procedure described below to curl the paperoutward within 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.(C) Printing sideWe recommend printing paper that has been curled outward one sheet at a time.Check 4: If you are printing on thick paper, select the Prevent paperabrasion setting.Selecting the Prevent paper abrasion setting will widen the clearance between the Print Head andthe loaded paper. If you notice abrasion even with the media type set correctly to match the loadedpaper, set the machine to prevent paper abrasion by using the Operation Panel or the computer.Print speed may be reduced if you are selecting the Prevent paper abrasion setting.* Deactivate the Prevent paper abrasion setting once printing is complete. If not, this setting remainsenabled for all subsequent print jobs.To set by using the Operation PanelPress the Maintenance button repeatedly until the LED displays as follows, then press theBlack button to enable the Prevent paper abrasion function.To disable the Prevent paper abrasion function, press the Maintenance button repeatedly untilthe LED above appears, then press the Color button.To set by using your computerOpen the printer driver setup window, and in Custom Settings in the Maintenance sheet, selectthe Prevent paper abrasion check box, and then click Send.To open the printer driver setup window, see Opening the Printer Driver Setup Window.Check 5: If the intensity is set high, reduce the Intensity setting in theprinter driver and try printing again.If you are using plain paper to print images with high intensity, the paper may absorb too much inkPage 623 of 707 pagesPaper Is Smudged/Printed Surface Is Scratched
