9) Remove the wire cleaning motor together withthe support plate.10)Remove the mounting screws @3 from the frontand the rear (7 in total); then, remove thetransfer/ separation charging assembly.Figure 4-375aFigure 4-375b11)Remove the two mounting screws @4, andremove the guide plate @5; then, detach thefeeding belt from the feeding assembly.Figure 4-3764. MECHANICAL SYSTEMCOPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-4923232425
