COPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)Keep the following in mind for items in service mode ( ) relating to the RDF; e.g., ‘DOC-ST-R’, ‘DOC-ST-L’, ‘DOC-ST-M’, ‘P-INTL-R’, and ‘P-INTL-L’:1.These items affect the memory values on the RDF’s RDF controller PCB. You need not enter thevalues for these items, since initializing the copier’s RAM will not affect the memory of the RDFcontroller PCB.2.For these items, the following are true; they are for direct input to the RDF controller PCB.Operation 1When the data value under ‘DOC-ST-R’ is changed from 5 to 8, the result will be 8 - 5 = +3, caus-ing the original stop position to shift by +3.Operation 2When the data value under ‘P-INTL-R’ is changed from -7 to -5, the result will be -5 - (-7) = +2, caus-ing the original-to-original distance to shift by +2.3.For these items, the key on the copier’s control panel will cause pick-up and delivery regis-tration instead of SW1 on the RDF controller PCB.OK[7[3. OPERATIONS AND TIMING3-250Caution:
