This Service Manual provides basic facts and figures needed to service the plain paper copier NP6085in the field. The NP6085 is designed to enable automated copying work and may be configured with thefollowing system components:1. Stapler Sorter-E22. RDF-D13. Computer Form Feeder-A2 (C.F.F.)For descriptions on the RDF-D1 and the Stapler Sorter-E2, see their respective service manuals. Thismanual covers the NP6085 and the C.F.F.This Service Manual is organized as follows:CHAPTER 1, "General Introduction," shows the NP6085's features, specifications, and step-by-stepinstructions on how to operate the copier.CHAPTER 2, "Copying Processes," shows how the NP6085 generates copies while discussing eachof the steps involved.CHAPTER 3, "Operations and Timing," explains the NP6085's mechanical system by function andprinciples behind its electrical systems in relation to timing of each operation.CHAPTER 4, "Mechanical System," explains how to disassemble/assemble and adjust the NP6085.CHAPTER 5, "Installation," provides points to note when selecting the site of installation andinstructions on how to install the NP6085.CHAPTER 6, 'Maintenance and Inspection," provides tables of periodically replaced parts andconsumables/durables as well as a scheduled servicing chart.APPENDIX contains a general timing chart, general circuit diagrams, and PCB diagrams.This Service Manual is accompanied by the Service Handbook, which contains information on how tomaintain and inspect the NP6085 through adjustment and troubleshooting work.Information found in this manual may be updated from time to time for product improvement, and majorupdates are communicated in the form of Service Information bulletins.All service persons are expected to be thoroughly familiar with the contents of this Service Manual, theService Handbook, and Service Information bulletins and be ready to respond to the needs of the userpromptly.INTRODUCTIONCOPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)