If an Error OccursWhen an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshootingmessage is displayed automatically. Take the appropriate action described in the message.When an error occurs, the Alarm lamp flashes and a Support Code (error number) is displayed on thecomputer screen. For some errors, the ON lamp and the Alarm lamp flashes alternately. Check the status ofthe lamps and the message, then take the appropriate action to resolve the error.Support Code Corresponding to the Number of Flashes of the Alarm LampExample of 2 times flashing:(A) Flashes(B) Goes offNumber of flashes Cause Support Code2 flashes There is no paper in the rear tray. 10003 flashes The cover is opened while printing is in progress. 1203Paper is jammed in the paper output slot or in the rear tray. 13004 flashes The FINE cartridge is not installed properly, or the FINE cartridge notcompatible with this machine is installed.168A5 flashes The FINE cartridge is not installed. 1401The FINE cartridge cannot be recognized. 1403Appropriate ink cartridge is not installed. 14858 flashes The ink absorber is almost full. 1700, 17019 flashes The protective material for the FINE Cartridge holder or the tape may remainattached to the holder.189011 flashes The media type and paper size are not set correctly. 4102Cannot perform printing with the current print setting. 410312 flashes The specified data cannot be printed. 410013 flashes The ink may have run out. 168614 flashes The ink cartridge cannot be recognized. 1684663
