Making CopiesLoad the original on the platen glass to copy.1. Make sure that the machine is turned on.2. Load A4 or Letter-sized plain paper.3. Load the original on the platen glass.Note• You can switch the size of paper loaded in the rear tray between A4 and Letter.Switching the Page Size between A4 and Letter4. Press the Color button for color copying, or the Black button for black & white copying.The machine starts copying.Remove the original on the platen glass after copying is complete.To make multiple copiesPress the Color button or the Black button repeatedly according to the number of copies you want.Press the same button (Color button or Black button) as the one which you previously pressed.Important• Do not open the document cover or remove the original from the platen glass until scanning iscompleted.While the machine is scanning the original, the ON lamp keeps flashing.• If the original covers the whole page, area (B) in the figure below cannot be printed.(A) The direction in which the paper is ejected(B) Unprintable areaFor details on the printable area:For A4 sized paper:Other Sizes than Letter, Legal, EnvelopesFor Letter-sized paper:Letter, Legal403