Precautions for Safe Transport of the MachineWhen relocating the machine, make sure of the following.Important• Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficientprotective material to ensure safe transport.• With the FINE cartridge left installed in the machine, press the ON button to turn off the power. Thisallows the machine to automatically cap the print head, thus preventing it from drying.• After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing somay cause the ink to leak during transport and cause damage to the machine.• When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" tokeep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".1. Turn the machine off.2. Confirm that the ON lamp is off and unplugging the power cord.Important• Do not unplug the machine while the ON lamp is lit or flashing, as it may cause malfunction ordamage to the machine, making the machine unable to print.3. Retract the paper output tray and the output tray extension, then close the paper support.4. Unplug the printer cable from the computer and from the machine, then unplug the powercord from the machine.5. Use adhesive tape to secure all the covers on the machine to keep them from openingduring transportation. Then pack the machine in the plastic bag.6. Attach the protective material to the machine when packing the machine in the box.262
