About PictBridge (Wireless LAN) Print SettingsSettings on a PictBridge (Wireless LAN) Compliant DeviceThis section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on aPictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instructionmanual.Note• In the following description, names of setting items are given according to those used in Canon-brandPictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on thebrand or model of your device.• Some setting items explained below may not be available on some devices. When you cannotchange print settings on a device, the printer prints images as follows:Paper size: 4" x 6"/ 10 x 15 cmPaper type: PhotoLayout: 1-up, BorderedDate/File No. Print: Not printedThe following settings can be used when printing from a PictBridge (Wireless LAN) compliant device.Paper size 4" x 6"/ 10 x 15 cm, 5" x 7"*, A4, 8.5" x 11"(Letter)* Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices.(May not be selected depending on the device.)Paper type • Default: Photo Paper Plus Glossy II PP-201• Photo:Photo Paper Plus Glossy II PP-201• Plain:A4/Letter sized plain paperLayout Default (Bordered), Index, Bordered** With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" markallows you to print shooting info (Exif Data) on the margins of the specified data (1-up). (May notbe available with some Canon-brand PictBridge (Wireless LAN) compliant devices.)Print date & fileno.Default (Off: No printing), Date, File No., Both, OffTrimming Default (Off: No trimming), On (follow the camera's setting), Off401
