Printing Out Network Setting InformationYou can print out the current network settings of the machine.Important• This print out contains valuable information about your computer. Handle it with care.1. Make sure that the printer is turned on.2. Load a sheet of A4 or Letter-sized plain paper.3. Press and hold the Stop button until the Alarm lamp flashes 15 times.4. Release the Stop button.The machine starts printing the network setting information.The following information on the machine's network setting is printed out.Item Explanations of the item SettingWireless LAN Wireless LAN Enable/DisableConnection Connection status Active/InactiveMAC Address MAC Address XX:XX:XX:XX:XX:XXSSID SSID SSID of the wireless LAN/SSID of the accesspoint modePassword Password Password of the access point mode (8 to 10alphanumeric characters)Communication Mode Communication Mode Infrastructure/Access Point ModeChannel *1 Channel XX (1 to 13)Encryption Method of the Encryption none/WEP/TKIP/AESWEP Key Length WEP Key Length Inactive/128/64Authentication Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2-PSKSignal Strength Signal Strength 0 to 100 [%]TCP/IP Version TCP/IP Version IPv4 & IPv6/IPv4IPv4 IP Address Selected IP Address (IPv4) XXX.XXX.XXX.XXXIPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXXSubnet Mask Subnet Mask XXX.XXX.XXX.XXXIPv6 IP Address *2 Selected IP Address (IPv6) XXXX:XXXX:XXXX:XXXXXXXX:XXXX:XXXX:XXXX185
