CHAPTER 13 TROUBLESHOOTING13-264 COPYRIGHT © 2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.CodeE5F3E5F2E5F4E5F1E5F0E5F5ItemDetail code010102010201020101Detection• The jogging home position sensor does not turn onwhen the jogging motor has been driven for 0.5 secondor longer.• The guide home position sensor does not turn on whenthe guide motor has been driven for 0.4 second orlonger.• The guide home position sensor does not turn off whenthe guide motor has been driven for 1 second or longer.• The stitching home position switch does not turn offwhen the stitch motor (rear) has been driven forwardfor 0.5 second or longer.02 • The stitching home position sensor does not turn onwhen the stitching motor (rear) has been driven reversefor 0.5 second or longer upon jam recovery.• The count of pulses detected by the folding motorclock sensor has fallen to a predetermined level orlower.• The jogging home position sensor does not turn offwhen the jogging motor has been driven for 1 secondor longer.• The paper positioning plate home position sensor doesnot turn on when the paper positioning plate motor hasbeen driven for 1.25 seconds or longer.• The paper positioning plate home position sensor doesnot turn off when the paper positioning plate motor hasbeen driven for 1 second or longer.• The stitch home position switch does not turn off whenthe stitch motor (front) has been driven forward for 0.5second or longer.02 • The stitch home position sensor does not turn on whenthe stitch motor (front) has been driven in reverse for0.5 second or longer upon jam recovery.E5F6 01• Jogging motor(M35)• Jogging platehome positionsensor (PI65)• Guide motor(M33)• Guide homeposition sensor(PI73)• Stitch motor(rear, M36)• Stitch homeposition switch(rear, MS32)• Paper positioningplate motor(M34)• Paper positioningplate homeposition sensor(PI66)• Folding motor(M32)• Folding motorclock sensor(PI64)• Stitch motor(front, M37)• Stitch homeposition switch(front, MS34)• Paper pressureplate motor(M38)• Paper pressureplate homeposition sensor(PI74)• The paper pressure plate home position sensor does notturn on when the paper pressure plate motor has beendriven for 0.3 second or longer during movement to thepaper pressure plate home position.02 • The paper pressure plate home position sensor does notturn off when the paper pressure plate motor has beendriven for 0.3 second or longer during movement to thepaper pressure plate top position.2. Saddle Stitcher
