COPYRIGHT © 2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A. ixA. Control System ...................... 7-3B. Sequence of Operations (pickup).............................................. 7-41. Right Deck ........................ 7-42. Pickup from the Cassette 4......................................... 7-5C. Controlling the Pickup Motor (M2).............................................. 7-61. Outline .............................. 7-6D. Movement of the Lifter ........... 7-71. Outline .............................. 7-72. Lifter Limiter (deck right/left)......................................... 7-93. Detecting the Presence/Absence of Paper ........... 7-104. Detecting the Level of Paper....................................... 7-10E. Detecting the Cassette PaperSize ..................................... 7-131. Cassette Deck Right/Left....................................... 7-132. Cassette 3/4 ................... 7-133. Markings on the Width GuideRail ................................. 7-144. Paper Size ...................... 7-15F. Manual Feed Tray PickupAssembly ............................. 7-181. Pickup Operation ............ 7-182. Detecting the Paper Size....................................... 7-19III. CONTROLLING THEREGISTRATION CLUTCH................................................. 7-20A. Outline ................................. 7-20B. Control System .................... 7-20C. Sequence of Operations(registration brake) .............. 7-21IV. MAKING DOUBLE-SIDED COPIES................................................. 7-22A. Control System .................... 7-221. Copying on the First Side....................................... 7-222. Copying on the Second Side....................................... 7-23B. Sequence of Operations ...... 7-24C. Controlling the Reversal Motor(M11) ................................... 7-251. Outline ............................ 7-25D. Controlling the Duplexing FeederMotor (M12) ......................... 7-261. Outline ............................ 7-26E. No-Stacking Operation ........ 7-271. Outline ............................ 7-272. Outline of Operations ..... 7-28F. Detecting the HorizontalRegistration Position ........... 7-321. Outline ............................ 7-322. Operations ...................... 7-333. Controlling the HorizontalRegistration Motor (M15)....................................... 7-34V. CONTROLLING THE DELIVERYASSEMBLY .............................. 7-35A. Reversal Delivery ................ 7-35VI. CONTROLLING THE CASSETTEHEATER ................................... 7-36VII. DETECTING JAMS .................. 7-38A. Outline ................................. 7-381. Arrangement of Jam Sensors....................................... 7-382. Types of Jams ................ 7-39B. Sequence of Operations (jamdetection) ............................. 7-401. Delay Jams ..................... 7-402. Stationary Jams.............. 7-43VIII.DISASSEMBLY/ASSEMBLY .... 7-44A. Manual Tray Assembly ........ 7-451. Removing the Manual TrayUnit ................................. 7-452. Removing the Pickup Roller....................................... 7-463. Mounting the Pickup Roller....................................... 7-464. Removing the Feeding Roller....................................... 7-475. Orientation of the FeedingRoller .............................. 7-476. Removing the SeparationRoller .............................. 7-487. Adjusting the Tension of theSeparation Roller............ 7-488. Removing the Manual FeedTray Paper Sensor ......... 7-499. Routing the Manual Feed TrayAssembly Side Guide TimingBelt ................................. 7-5110. Position of the Pickup RollerReleasing Solenoid of theManual Feed Tray .......... 7-5211. Removing the Manual FeedRoller .............................. 7-5212. Mounting the Manual FeedRoller .............................. 7-54B. Deck/Cassette Pickup Assembly............................................ 7-551. Removing the Front Deck(right) .............................. 7-55
