COPYRIGHT © 2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A. 11-17CHAPTER 11 INSTALLATIONI. Checking Images/Operations (user mode)No.123456Remarks• Adjust the contrast of the control panel using thecontrol dial on the screen. Inform the user of howthe dial may be used.• Check that the Supply Paper indicator has turnedon.• Press the keys on the keypad and the Clear key tomake sure that the correct copy count is indicated.Caution:If you need to change the size of the deck(R) or (L), see J. "Changing the Size of theFront Deck (right and left)."Marking AMarking HStops230VWorkPush the releasing buttons of the cassettes3 and 4; then, slide out the cassettes to thefront, and remove the packing material.Set the side plates of the cassettes 3 and 4against the holes (A4/A3) of the markingM.Fit the stops into the holes identified asfollows so that the bottom of the cassettewill not lift.A: STMT-RH: LTR-RCaution:This step applies only if the userdoes not use Inch-configured paper.Connect the power plug to the outlet;then, turn on the main power switch andthe control panel power switch insequence.Caution:In the case of a 230V model,connect the power plug that comeswith the unit to the copier beforemaking checks.Caution:Be sure grounding is properly made.Otherwise, the leakage breaker canfail to operate properly.Place copy paper into the cassettesaccording to paper size.Attach the size stickers to the paper sizeplate of the cassettes.Set each cassette to the copier.
